The Voltera V-One dispenses conductive ink and solder paste onto FR4, but really... you can use it for whatever you want.
On your desktop and on your schedule, the Voltera V-One gets you from prototype to production faster than ever before.
The ink cartridge is installed in the dispenser, and the dispenser is mounted on the V-One. All of our attachments are magnetically mounted, so you do not need any special tools to swap them.
During a print, the dispenser gear will rotate to apply and relieve pressure to accurately control the ink flow. With the click of a few buttons you can be printing 8 mil (200 micron) traces, but don't worry the software will guide you every step of the way.
This high precision probe was developed from the ground up and creates a height map of your substrate. The V-One takes the map into account and makes micro adjustments to ensure a constant printing height of 100 microns.
Since we do not need the substrate to be conductive, we can dispense on rigid materials like FR4, glass and ceramics, along with flexible substrates like Kapton (Polyimide).
The V-One comes with all the accessories and consumables you need to start building hardware faster.
1 - Voltera V-One.
A protoyping tool that can fit on your desk.
1 - Probe.
A sensor that maps the height of your board.
2 - Clamps.
Hold your board in place while dispensing
1 - Burnishing pad.
Scrub your board to see the traces turn silver!
2 - Dispensers.
Pop the cartridges in and start dispensing!
1 - Conductive ink.
Over 90% silver and fully solderable.
1 - Solder paste.
Lead free paste that makes assembly a breeze.
1 - Solder wire spool.
A special alloy to attach your components.
10 - Small substrates.
Every circuit needs a place to live!
6 - Large substrates.
To help you protoype larger circuits.
How long does it take to make a board?
What is the print area of the V-One?
Can the V-One make vias and through holes?
Does the V-One pick-and-place components?
Can it print more than 2 layers?
Find the most up to date specifications about the Voltera V-One here. Send us an email if you cannot find what you are looking for.
Minimum trace width
Minimum passive size
Minimum pin-to-pin pitch
12mΩ/sq @ 70um height
Supplied Substrate material
Maximum board thickness
Minimum Pin-to-Pin pitch
Solder Paste Alloy
Solder wire alloy
Soldering Iron Temperature
128mm x 116mm
Max. heated bed temperature
Dimensions (L × W × H)
390mm x 257mm x 207mm
Windows 7, 8, 10 (64bit), OSX 10.11+
Compatible file format
Let's build a quote for you!