Assemble your boards in half the time.

Ditch the stencil and the soldering iron. Just mount your boards on the V-One and dispense paste in minutes.


Min. pad size.



15 mins

or less

Skip the soldering iron.

Focus on designing, not soldering. Regardless if your boards come from a factory, or from your desk - just mount them on the V-One and off you go.

Forget the stencil.

Save hundreds of dollars in stencil costs by skipping them altogether. The V-One makes populating your prototype boards a breeze.

In just a few minutes you can have paste on boards printed by the V-One or traditionally fabricated by a factory.

A built in heated platform.

After placing all of your surface mount components just hit the reflow button and sit back to enjoy the show.

With a 550W heater, the V-One can reach reflow temperatures in under a minute. Use our recommended heating profile, or manually adjust the temperature for complete control.

Order your boards from a factory or print them on the V-One.

Pop your board on and dispense solder paste in minutes.

Place your components on and watch them reflow!

The hard parts made easy.

Soldering BGA components by hand is out of the question. Take the guesswork out of the equation and use the V-One.

The amount of paste dispensed can be adjusted on the fly with a touch of a button. Pads can be as small as 0402 and IC's can have a pitch of 0.5 mm

Status indicators.

The unit is equipped with LED indicators that let you know the status of the machine from accross the room.

The V-One will glow red when it is reflowing and a cool blue when the cycle has finished and it is safe to touch.


How long does a paste cartridge last?

How long does it take to paste and reflow?

Can I use my own paste and reflow profile?

Does the solder paste contain lead?

Am I limited in what components I can use?

Simplify your life.

The V-One cuts your development in half and gets you to market faster.

Ready to build faster?

We can help with that.